Selecting a Grounding Gland: CG EMC2 vs. CG EMC-4
EMC-2
- → Optimal grounding of shielded cable
- → One direction installation
- → Impact resistant
- → Suitable for the highest demands of today's technology
- → Easy installation
- → Easy handling
- → High corrosion resistance
- → Water tight
- → Strain relief
EMC-4
- → Optimal grounding of shielded cable
- → Bi-directional installation
- → Impact resistant
- → Free radial and axial movement of the cable without any damage to the braid
- → Easy installation
- → Large contact surface of the finters allowing low contact resistance
- → High contact performance under vibrating conditions
- → Water tight
- → Strain relief
Filter Cord Grip Selection
EN4-1 1/2
Category: EMC Grounding Glands
| Thread | NPT 1 1/2" |
| Series | CG EMC-4 EMC Grounding Gland |
| Material | Nickel Plated Brass |
| Temp Range (Permanent) | -20°C to +100°C |
| Temp Range (Intermittent) | -40°C to +150°C |
| Protection Class | IP 68 - 5 Bar |
| Flammability | V2 (according to UL 94) |
| Approvals | DNV-GL, CE, RoHS |
| Clamping Range | 1.181 - 1.496 in. (30.0 - 38.0 mm) |
| Shield Diameter (in) | 1.024 - 1.339 |
| Shield Diameter (mm) | 26.0 - 34.0 |
| Thread Diameter | 1.902 in. (48.3 mm) |
| Wrenching Flats | 2.283 in. (58 mm) |
| Thread Length | 0.866 in. (22 mm) |
| Height (in) | 2.835 |
| Height (mm) | 72 |
| Locknut P/N | LN-1 1-2 (Locknuts need to be purchased separately) |
| Torque Values | Torque Values for EMC-4 Grounding Glands |
| Installation Guide | EMC Installation Guide |
| Thread & Hole Sizes | Thread Diameters & Holes Sizes |
| Product Datasheet |
 |
| In Stock | Buy Now |